Fosheze Now • 100%
Yeah, it's less cotagecore and more post-apocalyptic.
Fosheze Now • 100%
Weird, how in the world did doughnut get mistranslated into AIDS?
Fosheze Now • 100%
I like to think that he forgets, keeps trying and then makes a new post about it
Fosheze Now • 100%
Yeah, my parents made too much for me to get shit regardless of the fact I was living on my own and paying for everything myself. But I couldn't declare myself as independant unless I was 26 or married. It's a bullshit system. I was half debating finding a fellow student that wanted to get temporarily hitched just for FAFSA benefits.
Fosheze Now • 50%
Y'all ever notice that the way your mouth moves when you say Mercedes makes you smile.
Fosheze Now • 100%
They could care less as long as someone'll bleed.
Fosheze Now • 100%
Anyone know what they are trying to say. I'm genuinely curious what a translator could possibly turn into AIDS.
Fosheze Now • 100%
When you get a carbonator you want to try carbonating everything.
Fosheze Now • 100%
Gotta love the state fair cheese curds that can make you actively feel your arteries clogging. Probably makes your heart run like an F250 stuck in ecoboost mode on a steep incline but they're delicious.
Fosheze Now • 100%
I'm pretty sure the LD50 of cheese was discovered in Wisconsin.
Fosheze Now • 100%
Ah, yeah. Ideally you get the natural curds. In a pinch you can just chop up blocks though. The best ones I've actually ever had were fried cubes in a small town dive bar.
There are far bigger food crimes out there than frying cubes of cheese and calling them cheese curds.
Fosheze Now • 53%
Never heard of cheese curds? Take that same block of cheese from the sandwich chop it up batter it then deep fry it and you have a delicious socially acceptable appetizer. Hell, it would be a small portion size for that appetizer.
Fosheze Now • 100%
Menards, world renowned for selling the wettest possible lumber.
Fosheze Now • 80%
So a few tips for cast iron if you want to know why people like it. It does take a bit of practice because cooking with it feels different and wrong when you're used to other pans. But once you know how to work it it legitimately does cook better and clean easier while being practically indestructable. I used to think the same as you until I made myself learn how to use it and now I will never go back.
-
Let it properly heat up before you put anything in it or it will stick. Flick a drop of water at it before cooking and if the water beads up then it is ready. Unlike other pans, cast iron has a lot of mass and takes a bit to warm up. But that also comes with the advantage of being able to maintain an even and stable temp across the pan. Cast iron feels like cooking on induction no mater what type of range you have.
-
When in doubt use more oil, butter, or grease.
-
Use metal tools. This alone is one of the big advantages of cast iron. Unlike other pans you don't need to baby cast iron. I use a steel grill spatula on mine.
-
When you're done cooking just wipe it out with a paper towel while it is still hot. Unlike other pans you actually want to leave a thin layer of oil or grease on cast iron. You only need to get the food out of it which usually only requires a quick wipe. If you cooked something saucy then just wash it like you would any other pan (except don't leave it to soak), just be sure to completely dry it on the stove afterwords and apply a thin layer of oil to it.
-
Use it at least every other week. The more you use it just for frying thing the more nonstick it gets as the layer of seasoning builds up. Letting cast iron sit is how it gets sticky and nasty. If you are going to store it long term then wash it with soap, dry it on the stove, and coat it in a thin layer of flaxseed oil because that stuff stays good practically forever.
Fosheze Now • 100%
Looks like you got it. Thank you.
https://en.wikipedia.org/wiki/Allium_tuberosum
Cool, I figured they were safe to eat but it's good to know for sure. Also not even listed as being invasive. Definitely gonna keep spreading these because like I said in the origional post the bumble bees go absolutely nuts for them.
Edit: Answer - [https://en.wikipedia.org/wiki/Allium_tuberosum](https://en.wikipedia.org/wiki/Allium_tuberosum) I've been letting this grassy plant slowly take over my yard and I haven't been able to actually identify it. It has white flowers in late summer that bumble bees absolutely love. It smells like onions when you cut it and it tastes like onion as well except maybe slightly more mild. Location: SE Minnesota Not flowering:  Seeding out: 
Fosheze Now • 100%
Exactly. The only thing COVID changed was that all the resturants became carry out only. The only things I can think of that actually closed were bars.
Fosheze Now • 98%
If I learned anything durring covid it's that basically every business is "essential".
Fosheze Now • 100%
We really need to break our conditioning that employment is the highest priority in our lives.
It's not really conditioning when it's actually the case. Without my job I'm likely homeless or dead within weeks. If Iose my job then I can no longer pay my bills, within a few months I'll be homeless. More urgently though I lose access to my health insurance which means I lose access to the medications keeping my mental illness in check. Finding a new job normally is a pain; finding one when you're so depressed that you really don't even care if you live or die is next to impossible. Also once it flares up you tend to stop caring about even seeking treatment for it making it a self perpetuating issue. If I got fired I would have only a few weeks to find a new job before I wound up in a position I likely wouldn't recover from. Sure there are things like unemployment but that doesn't even come close to paying my bills let alone affording my own health insurance.
So it would take a lot for me to risk walking away from my job and risk getting fired. I could easily see myself in the same position as these people, waiting until it's too late to run out of fear of losing my job. If we want people to be able to walk away from situations like this then we need to make survival possible without employment. We need healthcare to not be tied to employment and we need real unemployment pay to keep people afloat while they find a new job.
Fosheze Now • 97%
Chronic low level lead poisoning durring their formative years.
How are you supposed to decide where to get care for emergent conditions? Where is the dividing line between "just book a clinic visit", "head into urgent care when you get a chance", and "go inmediately to the ER"? So this is a question I've always struggled with and it makes me feel very dumb especially because I literally am a EMR. This feels like something I should know. But at the same time I have also called to book a clinic visit before and had the scheduler tell me to go to the ER immediately only for it to wind up being nothing. Certain things are obvious of course. Like if I need stitches or there is other major trauma then I know to go to the ER. If it is something like a concerning infection then I know urgent care can sort me out. For a skin rash that's probably a clinic visit. If urgent care is closed and it can't wait then default to the ER. But there are also the issues where I genuinely don't know on what side of the line they should fall. This is especially an issue for things that have been going on for a while which I know could be severe but almost certainly aren't. For example (not asking for medical advice) I've been having repeated extended periods of heart palpitations for the past 2 weeks. At first I just chalked it up to screwing up my anxiety med schedule while I was on vacation because my med situation does cause heart palpitations if I screw it up. So I didn't think much of it at first but now I've been back on my meds properly for 2 weeks with no change. So, that's cardiac symptoms which in a patient would make me tell them to immediately go to the ER just to be safe. But at the same time it's been going on for 2 weeks and it's probably just some vitamin deficiency or something so it probably wouldn't kill me to wait a week for a clinic appointment (no walk in clinic here). Do I split the difference and go to urgent care? It's like schrodingers medical issue, it's both the worlds most benign thing and a symptom of immediate death until someone looks into it, so how do I know who should open that schrodingers box? It seems like there has to be some easy dividing line on how to know which one to go to that I just don't know. Edit: In USA, because that probably matters here.
So I recently upgraded every component in my PC to be fairly high end, except I didn't have the money to upgrade my GPU at the time so I was running with my old GTX 1070 for a while. Today I had some extra money so I finally got around to picking up a RTX 4070 super. While installing it I just discovered a slight hitch in my plan. My primary monitor is 4k and uses display port so it isn't an issue. But my secondary monitor is an ancient 1080p monitor which only uses dvi and vga. The 4070 super only has display port and HDMI slots. I've been running with two monitors for so long that I don't know if I can stand going back to a single monitor. It's already too late to run out and pick up an adapter so my plan for now is to install both GPUs in my PC and just pull the 1070 back out whenever I get around to getting a new secondary monitor or an adapter. Will a RTX 4070 super and a GTX 1070 both work in the same PC or am I just stuck with one monitor until I can get an adapter?
I like the bit of minty burn and it doesn't feel greasy afterwords like the non-alcohol based ones I've tried.
A friend of mine just sent me this picture and said someone they knew just got a capybara. I informed them that that definitely isn't a capybara. Now neither of us know what it is. It kinda looks like it's in the uncanny valley of the rabbit species. Is it just a fucked up looking rabbit?
Seriously, what sadist saw a flat PCB surface, flat pick and place machine heads, and said "lets create a round component"? Joking aside I am genuinely curious what advantage the MELF design actually offers. I know they're a pain to get a machine to place properly, they have more solder flow issues than components with flat leads, and they seem like they would be harder to manufacture too. So why a round component? Anyone here have any insight on why they even exist?
So I just discovered that I have been working next to the waste of oxygen that raped my best friend several years ago. I work in a manufacturing environment and I know that you can't fire someone just for being a sex offender unless it directly interferes with work duties (in the US). But despite it being a primarily male workforce he does work with several women who have no idea what he is. He literally followed a woman home, broke into her house, and raped her. Him working here puts every female employee at risk. How is that not an unsafe working environment? How is it at even legal to employ him anywhere where he will have contact with women?
So I'm planning out a bathroom remodel and part of that is replacing the vent fan because currently mine is just venting into my attic (no bueno). I know normally bathrooms are vented out through the roof but my bathroom is on an exterior wall so I was wondering if I could just vent it out the side of the house. I'm going to be ripping open that wall anyways and I would much rather cut a hole in the side of the house than run a vent pipe up through the roof. Also I'm in Minnesota if climate is a concern.
I work on equipment that runs off 3 phase 208V but it uses uses a transformer to drop it down to 120V for most of the controls. On this equipment I noticed that there are two fuses on the lines exclusively feeding the 208V side of the transformer and a fuse directly off of the hot side on the 120V side of the transformer. Isn't the fuse on the 120V side of the transformer redundant? From my understanding, if there is a current spike on the 120V side of the transformer then that will cause a current spike on the 208V side of the transformer and immediately blow those fuses anyways. Is this just a certification thing where that redundancy is required? I'm in the US but this equipment does also get shipped to various overseas locations. Also, while it isn't standard, this equipment is capable of passing a TUV inspection if a customer requests it so I'm not sure if the potentially redundant fuse is just a TUV requirement.
I've been seeing a lot of users from alien.top commenting in various threads (mainly sports) lately. They only caught my attention because they are all flagged as bots and I typically manually block most bots (not all because there are some I like). For every one of them their entire post history consists of 1-2 comments or posts. When I took a look at that instance there is nothing there at all and it also shows no users. The comments look human enough but I guess I wouldn't be surprised to learn that all the comments are LLM generated. Is alien.top just someones LLM experiment or is something else going on here?
So I'm a refrigeration tech with some electronics manufacturing experience. But I've never combined the 2 skillsets so I've been toying with the idea of building a large vapor chamber to cool a computer via direct immersion in a refrigerant. I know its about as far from practical as you can get but it sounds like fun. Ignoring all of the many many other problems with doing this for now the one thing I'm not sure about is how well the electrolytic caps on the various components would survive. I would need to pull a fairly hard (500 micron) vacuum on everything before I charge it with refrigerant. I know most electolytic caps aren't vacuum rated but I'm not sure if that just means you can't have them operating in a vacuum or if they will immediately pop if you just subject them to hard vaccum period. Additionally while I am planning on using a low pressure refrigerant (probably some R-123 substitute but I'm definitely still working on that part) the components would all still be subject to pressures of up to about 20 PSIG at the high end. Beyond that point I would probably have an active cooling system kick in just for safety sake. I'm not sure how well the caps in particular would survive being immersed in a liquid under 20 PSIG pressure. Does anyone here have any experience subjecting electrolytic capacitors to hard vacuum or elevated pressure? At what point do they just pop?
So I just went and donated blood again and durring the recovery period it occured to me that it takes quite a bit of work for your body to regenerate that lost blood volume and the actual blood cells. Regrowing that many cells seems like it would be fairly energetically intensive. So how many calories does producing all those new blood cells actually consume? Is there even a way to know that?
While doing some exploration earlier I got a BPC for a Capital Gravity Capacitor Upgrade II. The weirdest thing is that the BPC isn't completely worthless. Contracts for that BPC still go for a couple million isk which means someone must be buying them and producing capital sized scanning rigs. So now the real question is, who the hell is fitting their capital ship for scanning?
